Product Details ＋

Overview

This smooth, weather resistant masonry paint by Johnstone's has been specially formulated to give 10 years protection on sound exterior walls and surfaces including concrete, stone, brickwork, pebbledashing and roughcast rendering. The durable finish has good opacity, and its smoothness helps to stop dirt from accumulating, resists flaking and lets the surface expand and contract. Weatherguard Smooth Masonry Paint is available in a great choice of 10 colours.

Resists dirt accumulation
10 Years Protection
Durable
Flake resistant

Area	Exterior
Recommended Use	Exterior walls including brickwork, pebbledashing, concrete and stone
Base	Water-Based
Coverage	Up to 12m² per litre
Drying Time	1-2 Hours
Re-Coat Time	2 - 6 Hours
Recommended Coats	2 Coats
Application Method	Brush or Roller
VOC Levels	Low
Clean Up	Replace lid firmly. Remove as much paint as possible from your brush or roller before cleaning. Clean equipment immediately after use in warm soapy water and rinse thoroughly.

Preparation

Make sure that the surfaces are clean, dry and free from grease.

Treat any mould or fungi with a fungicidal wash and remove it with a stiff brush or scraper and treat again with the fungicidal wash.
Be sure to remove any flaking paint, distemper or limewash.
Dry brush and treat chalky underbound areas with stabilising solution as directed.

When creating dust, wear a mask. When using more than one tin, it's a good idea to mix the two tins to ensure an even colour.

Application

We always recommend preforming a test patch to ensure compatibility, ensure to also follow the instructions found on the packaging.

Apply only in conditions of 10 degrees celsius or above. Don't apply in damp conditions.
Stir well before use. Apply generously and evenly by brush or roller.
For absorbent surfaces, a small amount of clean water can be added to thin the paint, otherwise avoid thinning.
To ensure you get the most durable finish, apply two coats of Johnstone’s Smooth Masonry.
Under normal conditions the paint will be touch dry in 1-2 hours. Allow approximately 4-6 hours drying between coats.